Step By Step detailed Guide to Update Galaxy View SM-T677 to Official Android 5.1.1 Lollipop T677DXU1AOJ7 Firmware There is a Firmware leaked for Samsung Galaxy View.The firmware is based on Android 5.1.1 lollipop and having build number T677DXU1AOJ7.We are hoping that in future this 18.4″ gigantic tablet from Samsung may receive Android Marshmallow, but for now we have the stock android 5.1.1 lollipop firmware.Just follow the simple and easy step by step guide to safely Install Stock Android 5.1.1 Firmware on Galaxy View Important: This is only for Galaxy View SM-T677 device so don’t try this on other models. *Make sure there is at least 80% battery left on your smartphone before begin. How to manually Install Stock Android 5.1.1 Firmware on Galaxy View SM-T677 Warning: rootmygalaxy.net will not be held responsible for any kind of damage occurred to your Galaxy View SM-T677 while following this tutorial.Do it at your own risk. Full Guide – How to manually Install Stock Android 5.1.1 Firmware on Galaxy View SM-T677 Remember:
Take a proper backup of all your important data and settings on the Galaxy View SM-T677 before doing anything. Download and install the Samsung USB Drivers from on your computer.
DOWNLOADS Download | Android 5.1.1 for LTE Galaxy View (File: XSP-T677DXU1AOJ7-20151027140910.zip (1.14 GB) Odin V3.10
How to manually Install Stock Android 5.1.1 Firmware on Galaxy View SM-T677
Step By Step Guide
First of all, Download T677DXU1AOJ7 firmware file for your Galaxy View with suitable network or carrier. If it is a zip file, extract it to get the firmware file with .tar.md5 extension. Now turn off your phone and boot it into the Download Mode. To do this, turn off your device and then press and hold Volume Down + Home + Power buttons simultaneously for 2-3 seconds. When you see the warning screen with a yellow triangle sign, press the Volume Up/Down key to enter Download/Odin mode Download the required Odin.zip file and extract the file on your PC. You will get the Odin3_v3.10.7.exe file. Open it as the administrator to get to the Odin window. (If this Odin version fails, try using older v3.09.) Now Connect your Galaxy View to the computer using the USB cable. When you connect the device, the ID: COM port on Odin will turn Blue. You’ll also see“Added!!” message to indicate successful connection. If in case, Odin doesn’t detect your device, troubleshoot the following: Reboot your phone and turn off USB Debugging and turn it on again. Try reinstalling the Samsung USB Drivers. Try changing the USB cable and connecting to other ports. Now click the AP button on Odin and add the firmware file (T677DXU1AOJ7_T677OLB1AOJ7_xxx.tar.md5) . In the Options section, make sure that only the Auto Reboot and F. Reset Time boxes are checked. (Do not, in any case, check Re-Partition box) Before you proceed to firmware installation on Odin, make sure everything is set according to the screenshot. Now, click the Start button on Odin to begin firmware installation. Once you get a PASS! message on Odin, your device will restart. It’s the green signal that indicates a successful installation. In case you get Fail! message, go through the guide and requirements carefully.
Done!!!! Your Galaxy View now has the latest stock lollipop firmware. Source
